The main difference between ordinary calcined coal electrode paste and electric forged coal electrod
The main difference between ordinary calcined coal electrode paste and electric forged coal electrode pasteElectric calcined coalElectric forging coal is made
The main difference between ordinary calcined coal electrode paste and electric forged coal electrode paste
Electric calcined coal
Electric forging coal is made of electric furnace at high temperature. It has the characteristics of low ash, low sulfur, low phosphorus, high calorific value, and high compressive strength. It is an indispensable main material for the production of electrodes and various aluminum blocks.
Parameters Table
General calcined coal
Normally calcined coal is the high fixed carbon content of fine washed anthracite after calcining. It is calcined in a high-quality fine washed anthracite calciner at 1240°C. It can remove impurities such as sulfur, moisture and volatiles during the production process. With high strength, accurate physical and chemical indicators
The characteristics of ordinary calcined materials:
1 The particle size is moderate, the specific gravity is high, and the absorption rate is fast.
2 Pure chemical composition, high carbon, low sulfur, harmful components and micro, high absorption rate.
Parameters Table
By comparison, we can find that electric forging coal has better indicators, lower volatilization and lower ash content. And the most important thing is that the electrical resistance of forged coal can reach 500 or less. This feature allows the forged coal to meet the requirements of the electrode paste or the anode of the electrolytic cell.
Rongxing carbon electrode paste production uses high-quality electric forging coal as Raw material, and the performance of electric forging coal electrode paste is better. The submerged arc furnace using our Rongxing electrode paste has never had an electrode hard-breaking accident. Although the cost of electric forging coal is higher than that of ordinary calcined coal, it is worthwhile to meet the safety production needs of customers.
-
Article Tags:
electric forged coal electrode paste
www.chinaelectrodes.
2022-03-23 01:58:10Generally, when the cathode carbon block is lower than its roasting temperature, it shows a positive coefficient of thermal expansion as the temperature increases, while the ramming paste will shrink from curing temperature to the maximum roasting temper
www.chinaelectrodes.
2022-03-21 03:57:32From 1954 to 1976, calcined petroleum was widely used in aluminum plants. On the one hand, the carbon plant of aluminum factory produces anode paste, using local materials; On the other hand, there were no more effective pastes.
www.chinaelectrodes.
2022-03-19 13:55:29An important index to measure the performance of calcined pet coke is the content of volatiles in calcined pet coke. If the content of volatiles in calcined pet coke is too high, the shrinkage ratio of raw anode will be large in the roasting process, and